Kuppersbusch USA KD 6500.1 User Manual download pdf (Page 6)

6 GB

INSTALLATION

This canopy hood is designed to be fixed to any rigid vertical surface, over a gas or

electric hotplate and can be used either in the extraction mode (ducted to the outside) or

in the recirculation mode (internal recycling).

Warning

PERSONAL INJURY HAZARD

Because of the weight and size of the rangehood canopy, two or more people are

needed to move and safely install the rangehood canopy. Failure to properly lift

rangehood could result in damage to the product or personal injury.

Components

The hood comprises the following (fig.1 ):

• No.1 canopy

C complete with controls, lighting and ventilator unit

• No.1 telescopic chimney, comprising:

No.1 upper chimney element S

No.1 lower chimney element

• No.2 directional grills

• No.1 recirculation spigot

• No.2 additional side recirculation spigots

• No.1 bag containing:

No.2 brackets 2 to fix the chimney, screws, rawl plugs and documents.

• No.1 splashback

B (optional)

Installation instructions

For easy installation, proceed as follows:

• Fitting the wall brackets and Splashback

• Fixing the canopy

• Electrical connection and working test

• Ducting or Recirculation fitting

• Fitting the telescopic chimney

Fitting the wall brackets and Splashback

Please refer to (fig.2a-b):

• Draw a vertical line on the wall, from the centre of the cooking appliance up to the ceiling,

using a marking pen. This is to ensure the correct vertical alignment of the various parts.

• Fixing the wall brackets item

a) Place one of the brackets

2 against the wall approximately 1 or 2 mm from the ceiling or

from the top limit, aligning its centre (slot) with the vertical line.

b) Mark the centres of two keyholes in the bracket on the wall.

c) Rest the other bracket 2 against the wall, aligning it with the vertical line, at a distance X

measured as shown in fig.2 equal to the height of the upper chimney element S supplied

with the hood. The position X may vary, according to the various sizes of upper chimney

element available.

d) Mark the centres of the keyholes in the bracket on the wall.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments

Kuppersbusch USA KD 6500.1 User Manual Page 6

Comments to this Manuals

Related products and manuals for Cooker hoods Kuppersbusch USA KD 6500.1